Ayansh Trading Private Limited

Optiflow Powder INLINE Injector IG07 COMPLETE
MANUAL IG07 INLINE INJECTOR CPL.

The injector's unique design reduces wear consumption, guarantees a constant powder transport for a long time and an easy integration into any system.

Reliable and constant performance
A reliable and constant performance is ensured by simply exchanging the cartridge without replacing the whole injector.

Plug and Convey
All connections are equipped with a robust quick release mechanism. This enables a time-saving access to all parts. Disconnect and reassemble with an ease.

Constant powder output
The OptiFlow has a unique design with 135° open angle that reduces wear consumption and guarantees a constant powder flow for a long time.

Apply the right film thickness!
The OptiFlow precise design, combined with the patented DVC technology ensures precise and reproducible powder output.

Optimized color change
The smooth powder flow design and the axial sealing guarantee a optimized color change.

Low wear parts consumption
OptiFlow injectors can feed more powder with less compressed air. This reduces the wear of the injectors and of the guns.

Fuel Oil Pressure Sensor  5491908-411466612 Mexico Abazx For Cummins ISX QSX.

Application: Fuel Pressure Sensor for ISX and QSX Series plus other engines

Part Numbers: Cummins 5491908 - 411466612

Fuel oil pressure sensor

Vacuum Cleaner Brush Filter Mop.
HIGH EFFICIENCY FILTER FUNCTION: Our filters are made of high quality materials with good filtration performance, which can effectively capture fine dust and fine particles to ensure fresher indoor air.
♩ LONG LIFE DESIGN: Our filters are made of durable materials to last and maintain filtration performance. Not only does this provide long-lasting protection, it also reduces the frequency and cost of replacement.
♩ EASY REPLACEMENT: Our filter cartridges are easy to replace and install. You can easily remove the old filter and install a new one, saving time and effort.

• Aluminum Housed Braking Wire Wound Resistor Resistance
• 150W 20 ohm Silver Tone Aluminum Housed Braking Wire Wound Resistor Resistance
• Resistance Tolerance : 5% (J);Overall Size(Approx) : 18.8 x 4 x 2cm / 7.4" x 1.6" x 0.8"(L*W*T);Cable Size : 21 x 0.25cm / 8.3" x 0.098"( L*OD)
• Installing Holes Size(Approx) : 0.7 x 0.6cm / 0.236" x 0.275"(L*W);Terminals Size(Approx) : 0.64 x 0.4cm / 0.25" x 0.157"(OD*Inner D)
• External Material : Aluminum;Color : Silver Tone
• Net Weight : 270g;Package Content : 1 x Braking Resistor

Thrust Bearing Assembly for Transmission Planetary, Assy Thrust Bearing Washer Housing Ring (Small)
Product Details

• Separates a rotating component from a stationary or rotating component
• Reduces friction for smoother component operation
• Reduces wear for extended component life
• Supports rotational and thrust loads
• Built to original factory specification

• Single direction thrust ball bearings consist of a shaft washer, a housing washer and a ball and cage thrust assembly. The bearings are separable so that mounting is simple as the washers and the ball and cage assembly can be mounted separately.
• Single direction thrust ball bearings, as their name suggests, can accommodate axial loads in one direction and thus locate a shaft axially in one direction. They must not be subjected to any radial load.

The Autoscripts's FC-IP Foot Scroll Control is designed for use with WinPlus-IP applications to maximise performance, reliability, and comfort and can be used while standing or sitting.

The controller features a robust design and is easy to set up. Its adjustable sensitivity range allows you to configure the pedal to respond to a light or heavy touch, so you can easily scroll the text at your desired speed. At the side of the main pedal, which is accessible without lifting the foot, there is a programmable function button with selectable options such as previous story, reverse, and top of run order.

Using Power over Ethernet, the FC-IP requires just one Ethernet cable for both power and network connection to the WinPlus-IP software application. Finally, it features a light that indicates the controller's power and connectivity status.

ER-16-D140 COLLET CHUCK AND ER-16-6499B D-1/8 SPRING COLLET

ER-16-D140 Collet Chuck and ER-16-6499B D-1/8" Spring Collet,

Carbon Steel, High Hardness Straight Hole Collet Holder, Good Toughness for Milling Machine for Lathes,

Disc Outer Diameter :Approx 45mm/ 1.8in, Inner Hole Diameter; Approx 16mm/0.6in

BIMBA 010.5-DP 1/2 INCH Stroke, 7/16 INCH BORE, AIR Return, Double Acting, Original LINE, Pivot Type, Pneumatic Cylinder

SREEN INNOVATION Fontus interfaces with Janus to convert Motor Control Kit
SREEN INNOVATION Fontus Motor Control Kit.
Fontus also enables basic screen control over two-conductor wire using dry and wet contact closures. For example, when a door opens or a projector is activated, a contact closure or 12V trigger can signal a motorised screen to deploy.

Fontus interfaces with Janus to convert 485 communication and power over five conductor wire to only two conductors. Full two-way control & full power is maintained using our advanced BCP encoding & decoding protocol. Fontus also includes 2 dry contact closures and a wet contact closure for use with control.

• Metal Extruder Kit Mount Replacement Set for 1.75mm Set MK8 for 3D Printer
• Condition- New
• Package includes- 1 pcs only
• For color & size pls contact us
• In case of any query please contact seller.
• Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings

Product Details

• Separates a rotating component from a stationary or rotating component
• Reduces friction for smoother component operation
• Reduces wear for extended component life
• Supports rotational and thrust loads
• Built to original factory specification

• Single direction thrust ball bearings consist of a shaft washer, a housing washer and a ball and cage thrust assembly. The bearings are separable so that mounting is simple as the washers and the ball and cage assembly can be mounted separately.
• Single direction thrust ball bearings, as their name suggests, can accommodate axial loads in one direction and thus locate a shaft axially in one direction. They must not be subjected to any radial load.

Optiflow Powder INLINE Injector IG07 COMPLETE
MANUAL IG07 INLINE INJECTOR CPL.

The injector's unique design reduces wear consumption, guarantees a constant powder transport for a long time and an easy integration into any system.

Reliable and constant performance
A reliable and constant performance is ensured by simply exchanging the cartridge without replacing the whole injector.

Plug and Convey
All connections are equipped with a robust quick release mechanism. This enables a time-saving access to all parts. Disconnect and reassemble with an ease.

Constant powder output
The OptiFlow has a unique design with 135° open angle that reduces wear consumption and guarantees a constant powder flow for a long time.

Apply the right film thickness!
The OptiFlow precise design, combined with the patented DVC technology ensures precise and reproducible powder output.

Optimized color change
The smooth powder flow design and the axial sealing guarantee a optimized color change.

Low wear parts consumption
OptiFlow injectors can feed more powder with less compressed air. This reduces the wear of the injectors and of the guns.

Fuel Oil Pressure Sensor  5491908-411466612 Mexico Abazx For Cummins ISX QSX.

Application: Fuel Pressure Sensor for ISX and QSX Series plus other engines

Part Numbers: Cummins 5491908 - 411466612

Fuel oil pressure sensor

• 9g Analog Servo & Plastic Gear
• Size: 22.3*11.8*26.3mm
• Weight: 9g (0.32 oz)
• Wire Length: 18cm
• JR plug